Written by Moore Good Ink

Roush Yates Performance Parts currently has stocks of lightly used 7.250-inch Quarter Master triple-plate racing clutches and 13 x 1.250-inch brakes at their Rolling Hill Road, Mooresville store. New parts are the prerogative of NASCAR teams, and the Roush-Fenway/Yates Racing Cup, Nationwide, and Truck Series team vehicles are constantly being replenished with new parts. The parts removed represent excellent value and can be ideal for professional and Sportsman racers alike.

 Quarter Master 7-1/4 inch triple-plate racing clutch, part number 397050:

A. Input shaft diameter: 1-5/32

B. Spline: 26

C. Grooved pressure and floater plates for cleaner and cooler running

D. Stiffer cover design

E. Extremely high torque capacity

F. Lower moment of inertia

Quarter Master Racing Clutches specifies a minimum thickness of .094” for their clutch plates. Typically, these Roush Yates used plates are of .100 inch in thickness or thicker. They are visually inspected for wear and rejected if thinner than .100 inch. Any disc found with excessive wear, evidence of overheating or cracking is not for sale. Prices start at $135.00

Brembo or PFC Brake Rotors and Pads

A. Rotors: 13-inch diameter x 1.250-inch thick

B. Fits inside standard NASCAR 15-inch wheel

C. Ideal for cars requiring 54mm or 61 mm surface pad area

D. Brake pads have very little wear

E. Top hats and rotors sold separately if desired


Prices start at $100 per wheel (rotor and hat); pad sets start at $50

Check website for monthly specials and for further information contact:
Roush Yates Performance Parts
261 Rolling Hill Road,
Suite 2A
Mooresville, NC 28117
Toll-free telephone (877) 798-7977 or visit www.RoushYatesParts.com